beautypg.com

Auto pc adjustment, Computer input – Sanyo PJLINK PLC-XL51 User Manual

Page 29

background image

Computer Input

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical

positions to conform to your computer.

Move the red frame pointer to the
Auto PC Adj. item and press the
SELECT button.

“Please wait...” appears while Auto
PC adjustment is in process.

PC Adjust Menu

PC Adjust Menu icon

To store the adjusted parameters

The system parameters adjusted in the Auto PC Adjustment

can be stored in the projector. Once parameters are stored,

the setting can be done just by selecting a Mode in the PC

System Menu (p.28). See “Store” on page 31, for details.

Note:

• Fine sync, Total dots, Horizontal, and Vertical positions of

some computers cannot be fully adjusted with this Auto

PC Adjustment function. When the image is not provided

properly with this operation, manual adjustments are

required (pp.30-31).

• The Auto PC Adjustment cannot be operated when 480i,

575i, 480p, 575p, 720p,1035i, or 1080i is selected in the

PC System Menu (p.28).

• AUTO PC adj. cannot be selected when the projector is

on a network.

Auto PC Adjustment

Press the MENU button to display the On-Screen

Menu. Use the Point

7 8

buttons to move the red

frame pointer to PC Adjust Menu.

1

2

Use the Point

ed

buttons to move the red frame

pointer to Auto PC Adj. and then press the SELECT

button twice.

Auto PC adj.

Menu Operation

The Auto PC adjustment function can be operated directly

with the AUTO PC button on the remote control.

Remote Control

AUTO PC button

Direct Operation

29