Sanyo PJLINK PLC-XL51 - Manual (Page 22)

Basic Operation
Menu bar
Pointer
(red frame)
Menu icon
Item data
Press the Point
7 8
buttons to adjust the
value.
SELECT
button
Pointer (red frame)
Press the Point
ed
buttons to move the
pointer.
Item
How to Operate the On-Screen Menu
On-Screen Menu
Quit
Exit this menu.
The projector can be adjusted or set via the On-Screen
Menu. For each adjustment and setting procedure, refer to
the respective sections in this manual.
Use the Point 7 8 buttons to select a Menu icon; use
the Point ed buttons to select an item.
Press the SELECT button to show the item data. To
adjust the data, use the Point 7 8 buttons. Refer to the
relevant pages for more details about each adjustment.
To close the On-Screen Menu, press the MENU button
again.
Press the MENU button on the top control or on the
remote control to display the On-Screen Menu.
✔ Note:
• The selected item is not active until the SELECT button is
pressed.
1
2
3
SELECT button
POINT buttons
Remote Control
MENU button
22
Top Control
POINT buttons
SELECT button
MENU button
Press the SELECT button here
to display next items.
Press the SELECT button here
to display previous items.