Sanyo PJLINK PLC-XL51 - Manual (Page 25)

Basic Operation
Remote Control Operation
Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons
enables you to make the desired operation quickly without calling up the On-Screen Menu.
✔ Note:
• See the next page for the description of
other buttons.
Press the FREEZE button to freeze the picture on the
screen. To cancel the Freeze function, press the FREEZE
button again or press any other button.
FREEZE button
FREEZE button
1
2
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the Sound Menu icon.
Press the VOLUME+/– buttons on the top control or on the
remote control to adjust the volume. The volume dialog box
appears on the screen for a few seconds.
Press the MUTE button on the remote control to temporarily
turn off the sound. To turn the sound back on, press the
MUTE button again or press the VOLUME +/– buttons. The
Mute function is also effective for the AUDIO OUT jack.
Press the Point 7 8 buttons to switch the mute function On/
Off. When the sound is turned off, “On” is displayed. Press
the Point 7 8 buttons again to turn the sound back on.
Use the Point ed buttons to move the red frame
pointer to the desired item, and then press the SELECT
button.
Approximate level of
the volume.
Exit the Sound Menu.
Approximate level
of the volume.
Press the MUTE button to set the Mute function
On or Off. The display disappears after 4 seconds.
Sound Menu
Sound Menu
icon
Volume
Remote Control
VOLUME+ button
VOLUME- button
MUTE button
Volume
Mute
Press the Point 8 button to turn up the volume; press the
Point 7 button to turn down the volume.
Mute
Direct Operation
Menu Operation
Sound Adjustment
25
Top Control
VOLUME+/-
buttons
Auto setup function is provided to automatically execute the
setting of Auto setup (includes Input search and Auto PC
adj.) in the setting menu by just pressing the AUTO SET
button. Refer to page 49 for the setting of the Auto setup
function.
AUTO SET button
Remote Control
AUTO SET
button