Sanyo PJLINK PLC-XL51 - Manual (Page 62)

62
CAUTION
This projector is equipped with a projection window.
Do not rub the projection window with a hard fiber cloth or hit it with a something hard to prevent the projection
window from scratching. Do not use a chemical cleaner (liquid and solid) to avoid deteriorating the projection
window.
Maintenance and Cleaning
Cleaning the Projector Cabinet
Unplug the AC power cord before cleaning.
Gently wipe the projector body with a soft dry cleaning
cloth. When it is heavily soiled, use a small amount of
mild detergent and finish with the cleaning cloth. Avoid
excessive use of cleaner. Abrasive cleaners, solvents, or
other harsh chemicals might scratch the surface of the
cabinet.
When the projector is not in use, put the projector in an
appropriate case to avoid dust and being scratched.
Cleaning the Projection Window
Unplug the AC power cord before cleaning.
First, remove the dust with a blower. Then gently wipe the
projection window surface. Use a cleaning paper moistened
with methyl alcohol (methanol). Avoid excessive use of
cleaner.
Do not use abrasive cleaners, solvents, or other harsh
chemical cleaners to avoid damaging the projection window.