Entering and using programs, Initial procedure, Press , and – Sharp FO-4400 User Manual

Page 87: Press to select set, Press

Entering and Using Programs

5. Spec

Func

tions

Entering and Using Programs

If you frequently perform the same operation involving the same party, you can
program all the steps of the operation into one Program Key. This allows you to
perform the operation by simply pressing that key.

♦

Any Rapid Key which is not already programmed as a Rapid Key or a
Group Key can be used as a Program Key.

♦

You can include a timer setting in the program to have the operation
performed automatically at a selected time.

♦

To clear a mistake in the procedures that follow, press

Initial procedure

To program a Program Key, first perform the following procedure. After you
have completed this procedure, go to the procedure for the specific operation
you want to program (see the following pages).

STOP

Press

and

Press

to select SET.

Select a Program Key by pressing any
Rapid Key that has not yet been
programmed.

Enter a name for the program by pressing the letter entry keys (see Step
5 on page 25). (Maximum of 20 characters.)
If you don’t want to enter a name, go directly to Step 5.

Press .

MENU

START/
ENTER

Display:

1:PROGRAM ENTRY MODE
1=SET, 2=CLEAR

1:PROGRAM SET
PRESS PROGRAM KEY

Q / !

W / "

E / #

R / $

T / %

Y / &

U / '

I / (

O / )

P / =

SYMBOL

A / |

G / {

H / }

J / [

K / ]

L / +

Caps Lock

Z / <

X / >

N / *

M / ?

.com

SHIFT

/ ^

/ / \

; / :

Space

. / ,

DEL