Broadcasting using a group key, Broadcasting 64, Press – Sharp FO-4400 User Manual
Page 66: Press twice. transmission will begin, Load the document(s), Send ready will appear in the display, Broadcast mode select the mode
Broadcasting
64
Note: If you need to delete a number, press
or
until the destination
appears in the display and then press
.
4
Press .
5
If desired, press
and/or
to set the resolution and
contrast.
6
Press
twice. Transmission will begin.
•
A Transaction Report is automatically printed out after Broadcasting is
completed. Check the "Note" column of the report to see if any of the
locations are marked "Busy" or have a communication error code. If so,
send the document to those locations again.
STOP
START/
ENTER
RESOLUTION
CONTRAST
START/
ENTER
Broadcasting using a Group Key
If the fax machines to which you want to broadcast have all been programmed
into one Group Key (see Storing numbers in Group Keys which follows), you
can perform the broadcasting operation using the following simplified
procedure:
1
Load the document(s).
•
SEND READY will appear in the
display.
•
Press
and/or
to
set the resolution and contrast if
needed.
2
Press the appropriate Group Key.
Transmission will begin.
RESOLUTION
CONTRAST
BROADCAST MODE
SELECT THE MODE
Q / !
W / "
E / #
R / $
T / %
Y / &
U / '
I / (
O / )
P / =
SYMBOL
A / |
S
D
F
G / {
H / }
J / [
K / ]
L / +
Caps Lock
Z / <
X / >
C
V
B
N / *
M / ?
@
.com
SHIFT
/ ^
/ / \
; / :
Space
_
-
. / ,
DEL
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39