Sharp FO-4400 User Manual

Page 112

Optional Settings

110

Setting 31: SEPARATE MODE
If desired, you can have the fax draw a sheet of paper from one of the paper
sources after each fax reception. By loading colored (or large) paper in that
source, each colored sheet drawn will act as a separator that makes it easy to
distinguish where one multi-page document ends and another begins. A
Transaction Report printed after a reception will also be printed from that

paper source to act as a separator sheet. To turn on this function, press

and then select the paper source for the separator paper by pressing

for

the paper tray or

for the paper cassette. After turning on the function, be

sure to load appropriate paper in the selected paper source. To turn off

Seperate mode, press

. (Note that the function will turn off automatically if

the selected paper source runs out of paper.)

Note: This setting is only available if your dealer has installed the paper cassette
option.

♦

Initial setting: 2

Note: If you turn off the Separate Mode setting, Option Setting 16 will
subsequently appear in the display to allow you make an appropriate setting for
cassette selection. If you don’t make a selection, 1:AUTO SELECTION will be
automatically selected.