Sharp FO-4400 - Manual (Page 107)

Optional Settings
105
6. O
p
ti
onal
Setti
ngs
Setting 09: ERROR CORRECTION MODE (ECM)
Press (YES) to have any distortions in a transmission due to noise on the
telephone line corrected before print-out at the receiving end. This is only
effective when the other machine has ECM as well. Press (NO) to turn
the function off.
Note: If the transmission or reception is taking place in Super G3 mode, ECM
will operate regardless of the ECM setting.
♦
Initial setting: 1
Setting 10: AUTO COVER SHEET
Press (YES) to have the fax automatically generate a cover sheet and
send it as the last page of each transmission. Press (NO) to turn the
function off.
♦
Initial setting: 2
Note: In North America, Setting 11 is not used.
Setting 12: COPY SCANNING
This setting is used to reduce copies slightly before printing to ensure that
data on the edges are not cut off. Press (AUTO) for automatic reduction,
or (100%) for no reduction.
♦
Initial setting: 2
Setting 13: COPY CUT-OFF
This setting determines how the fax machine will copy documents that are
longer than the printing paper. Press (CONTINUE) to have the remainder
of the document printed on a second page, or (CUT-OFF) to cut off (not
print) the remainder.
♦
Initial setting: 2
Setting 14: RECEIVE REDUCE
This setting is used to reduce received documents slightly before printing to
ensure that data on the edges are not cut off. Press (AUTO) for automatic
reduction, or (100%) for no reduction.
♦
Initial setting: 1
1
2
1
2
1
2
1
2
1
2