Sharp FO-4400 User Manual
Page 106
Optional Settings
104
Setting 05: TRANSACTION REPORT PRINT SELECTION
This sets the condition for printing out a Transaction Report. Enter a number
from
to
as follows:
♦
Initial setting: 5
Setting 06: RECALL TIMES
This sets the maximum number of times your fax will automatically redial if the
line is busy. Enter any number from
to
.
♦
Initial setting: 02
Setting 07: RECALL INTERVAL
This sets the amount of time your fax will wait between automatic redials
when the line is busy. Enter
for 1 minute,
for 2 minutes, etc.,
up to a maximum of 15 minutes.
♦
Initial setting: 05
Setting 08: SECURITY SELECTION
Press
(ON) to turn polling security on, or
(OFF) to turn it off.
♦
Initial setting: 1
(ERROR/TIMER
MEMORY):
A report will be printed after an error, timer
operation, or memory operation
(SEND ONLY)
A report will be printed only after a
transmission
(ALWAYS PRINTS)
A report will be printed after each
transmission, reception, or error
(NEVER PRINTS)
A report will never be printed.
(ERROR ONLY)
A report will be printed only after an error
occurs
1
5
0
0
1
4
0
1
0
2
1
2
.
5
1
2
4
3