Samsung VP - MS12(BL) - Manual (Page 45)

45 45
ENGLISH
1 .
2.
3.
4.
◆ : .
◆ : .
. 146
5.
✤
NTSC NTSC
✤
✤
Setting the Miniket Photo :
Setting the System
Setting the NTSC/PAL
You can set the Miniket Photo's output properly when playback on a
TV .
1. Turn the Mode Dial to the Settings mode.
2. Press the [POWER] button to turn on the
Miniket Photo.
3. Select by moving the joystick
left / right.
4. Select the desired option by moving the
joystick up / down and then press the
joystick (OK).
◆ : Sets to NTSC standard.
◆ : Sets to PAL standard.
Refer to page 146
5. After you finish setting, turn the Mode Dial to
the desired mode.
[ Warning ]
✤ Recording and playback settings should be identical. NTSC
recordings are properly played back in NTSC mode.
✤ If recording and playback settings are different, displayed video
may not be perfect.
✤ When using a TV, be sure to set the same output setting. Playback
on a TV is not available if the video format is different than that of
Miniket Photo. For example, Miniket Photo is set to PAL and the
TV video format is NTSC, then video playback on the TV is not
available.
4
Settings
NTSC/PAL
Move Select
Settings Settings
NTSC/PAL NTSC/PAL
Move Move Select Select
3
Settings Settings
NTSC/PAL NTSC/PAL
Move Move Select Select
Settings
NTSC/PAL
Move Select