Samsung VP - MS12(BL) - Manual (Page 24)

You can charge the Battery Pack using AC Power
Adapter
or USB cable.
1. Turn off the Miniket Photo by pressing the
[POWER] button.
◆ Charging will begin only when the Miniket
Photo is turned off (using AC Power
Adapter or USB cable).
2. Insert the Battery Pack to the Miniket
Photo.
3. Open the Connector Cover of the set.
4. Charge the Miniket Photo.
[ Notes ]
✤ You may use the Miniket Photo powered by
the AC Power Adapter indoors where
available.
[ Warning ]
✤ It is recommended to fully charge the Battery Pack before use.
✤ You should only charge the battery in an environment between 32°F (0°C)
and 104°F (40°C).
✤ Ambient temperature may affect charging the Battery Pack; too low
temperature may result in longer charge time / incomplete charging.
✤ Before connecting the cable, make sure that you don’t have any foreign
substances between connectors.
24 24
ENGLISH
You can charge the Battery Pack using AC
Power Adapter and USB cable.
1. .
◆ Charging will begin only when the
Miniket Photo is turned off (using AC
Power Adapter or USB cable).
2.
3.
4.
5.
[ ]
✤
[ ]
✤
✤ 10°C ~ 30°C
✤
✤
How to Use the Battery Pack
Charging the Battery Pack
Connecting the AC Power Adapter
Connecting the USB Cable
4
DC Power Jack
USB Port
AC Power
Adapter
USB
Cable
Connect the AC Power Adapter with the
Miniket Photo properly and plug the AC
Power Adapter to the wall outlet.
Connect the USB Cable with the
Miniket Photo properly and connect
the other side to a USB port of a PC.
Connect the AC Power Adapter with the
Miniket Photo properly and plug the AC
Power Adapter to the wall outlet.
Connect the USB Cable with the
Miniket Photo properly and connect
the other side to a USB port of a PC.
USB Charging will charge the Battery
Pack up to 85%.
Cable
AC Power
Adapter