Samsung VP - MS12(BL) - Manual (Page 132)

132 132
ENGLISH
USB PictBridge ,
.
1. USB Miniket photo
PictBridge
2.
3.
[POWER] Miniket Photo.
◆ Pictbridge USB
" USB
4. [Shortcut 2] /
◆
[Shortcut 2]
Off< > - Date < > -
Time < > - Date & Time < >.
5. [Shortcut 3] ,
[Shortcut 4]
◆ 1-99
◆ 99 [Shortcut 3] 1.
◆ 1 [Shortcut 4] 99
6. [Shortcut 1] .
◆ [Shortcut 1]
7.
[ Warning ]
✤ PictBridge
[ ]
✤
[MENU]
✤
✤
PC
✤ , .
, .
PictBridge
PictBridge Mode: Printing with PictBridge
Wihth the provided USB cable and a PictBridge-supporting printer, you
can print your photo images directly without connecting to a PC.
1. Connect the Miniket photo and the
PictBridge supporting printer with a USB
cable.
2. Turn on the printer.
3. Press the [POWER] button to turn on the
Miniket Photo.
◆ If the USB connection is not made, the
message “Connect USB Cable!”
appears.
4. Press the [Shortcut 2] button to set the
date / time imprint option.
◆ Each press of the [Shortcut 2] button
cycles through Off < >-Date < >-
Time < >-Date&Time < >.
5. [Shortcut 3] button will increase the number of
copies, while the [Shortcut 4] button will decrease
the number of copies.
◆ Range of possibilities: 1 ~ 99
◆ Pressing the [Shortcut 3] button on 99 will set to 1.
◆ Pressing the [Shortcut 4] button on 1 will set to 99.
6. Press the [Shortcut 1] button to begin printing.
◆ To cancel printing, press the [Shortcut 1] button again.
7. When finished, disconnect the cable.
[ Warning ]
✤ This function works only with printers that support PictBridge.
[ Notes ]
✤ Number of copies and imprint options can be set in the menu.
Press the [MENU] button to access the function.
✤ For printing information, refer to printer’s product information.
✤ Depending on the printer, printing failure may occur. In this case,
try to print from a PC after copying images onto the PC.
✤ Depending on the printer, date and time imprint option may not be
supported. In this case, date and time menu will not be displayed.
Printing with PictBridge
ENGLISH