Smeg Electric Multifunction SE290X-6 - Manual (Page 10)

Instructions for the User
3.2.3 Switching on the oven
Press the
for a short time; the word “On” will appear on the programmer
display. The light inside the oven will come on to indicate that the cooking
operation required can now be set using the function selector knob (see
point 3.1).
3.2.4 Timer
The programmer can also be used as an ordinary timer.
In timer mode, the system will not cut out operation of the oven at the
end of the set time.
Press the key and the display will show the figures ; press the
value modification keys or . The symbol will appear on the display.
4 seconds after the last pressure on a key a buzzer will sound to indicate
that the countdown is starting.
At the end of the programmed time a buzzer will sound and the symbol
will disappear from the display.
To stop the buzzer at the end of the cooking operation press any of the
following keys:
, , , , .
After the timer is programmed, the display will return to the current time.
To view the cooking time remaining press the key.
3.2.5 Semiautomatic cooking duration mode
This setting only switches the oven off automatically at the end of the
preset cooking time.
Switch on the oven as described in point 3.2.3.
Press the key and the display will light up showing the figures
;
keep it pressed, and at the same time use the value modification keys
or to set the cooking duration up to a maximum of 10 hours.
4 seconds after the last pressure on a key a buzzer of confirmation will
sound.
The display will show the current time together with the A symbol.
Select a function using the function selector knob (as described in point
3.1).
37