Samsung SPH-I325 - Manual (Page 43)

Settings 35
Settings
2. Press the navigation key left or right to select a new level setting and
press Done (left softkey).
Changing the Keypad Backlight Time-Out
Select the length of time the keypad backlight stays on when you do not use the
keys.
1. From standby mode, press Start > More > More > Settings > Power
Management > Keypad backlight time out.
•
Choose 1 second, 2 seconds, 3 seconds, 4 seconds, 5 seconds, or
10 seconds.
2. Press the navigation key left or right to select a new time-out setting
and press Done (left softkey).
Restricting the Keypad Backlight Time-Out
By default, the keypad backlight time-out is enabled all the time. With this setting
you can restrict the time of day that the keypad backlight time-out will be enabled.
For example, if you were planning a day at the beach (when you would not need the
keypad backlight), you could disable the backlight time-out for that period.
1. From standby mode, press Start > More > More > Settings > Power
Management > Keypad backlight on.
2. Choose Any time (default) or Custom time. If you wish to set a custom
time, enter new start and end times using the 24-hour time format
(0000 - 2400), and press Done (left softkey). The backlight will be
enabled only during the start and end time that you have set.
Location Settings
Your device is equipped with a Location feature for use in connection with location-
based services.
The Location feature allows the network to detect your position. Turning Location
off will hide your location from everyone except 911.
Note: Turning Location on will allow the network to detect your position using GPS
technology, making some applications and services easier to use. Turning Location
off will disable the GPS location function for all purposes except 911, but will not
hide your general location based on the cell site serving your call. No application or
service may use your location without your request or permission. GPS-enhanced
911 is not available in all areas.