Sharp SD-HX600 - Manual (Page 69)

E-64
SD_HX600_SEC_SECL_E6.fm 04/3/15
ENGLISH
TINSKA016AWZZ
F
S
V
I
N
P
E
E
SD-HX600
Ad
v
a
nced
F
e
atures
- Conne
c
ting othe
r e
quipme
n
t -
! Recording between external equipment
using the AV selector
You can record images and sounds from the equipment connected to the VIDEO 2 or
VIDEO 3 input jack to a DVD recorder or VCR connected to the VIDEO 1 output jack.
The equipment should be connected to the AV selector with a video cable/S-video
cable and audio cable.
Procedure:
Notes:
" If an S-video cable or video cable is connected to the video input, signals are sent
to the S-video output and video output.
" You cannot record images from the equipment connected with a component video
cable.
" You cannot record sounds from the equipment connected with an optical digital
cable or coaxial digital cable.
" Some discs are copy protected and recording is not possible.
" You cannot record material with copy protection (digital broadcasts, etc.).
" While recording, do not switch to another function.
" You can also use the FUNCTION button on the main unit to set the input to VIDEO
2 or VIDEO 3.
" When recording between equipment connected to the AV selector, you do not
need to turn on the main unit. Select VIDEO 2 or VIDEO 3 with the function but-
tons on the AV selector. In this case, the speakers do not produce sound.
" To record the TV sound, press the TV button.
" Plug in each cable fully to prevent noise interference.
1 Turn on the AV selector and main unit.
2 Press the VIDEO 1, 2, 3 button on the remote control to set the input to VIDEO 2
or VIDEO 3.
3 Start recording on the equipment connected to the VIDEO 1 output jack and then
start playback on the source equipment.
VCR or DVD recorder
AV selector VIDEO 1
VIDEO 2
VIDEO 3
VCR, etc.