Sharp SD-HX600 - Manual (Page 54)

E-49
SD_HX600_SEC_SECL_E5.fm 04/3/15
ENGLISH
TINSKA016AWZZ
SD-HX600
Ad
v
a
nced
F
e
atures
- Cha
n
ging the
de
fa
ult s
e
ttings
of the
a
m
pli
fie
r -
Changing the default settings of the amplifier (continued)
When you select "LARGE", all channel signals are sent to the speaker.
When you select "SMALL", frequencies below the value you set for crossover fre-
quency (see page 51) are sent to the subwoofer.
(*) indicates the default setting.
Notes:
" The speaker size setting is only available for the subwoofer if the input is set to
tuner, or the surround is "STEREO" or "VIRTUAL".
" On some DVD-Audio or SACD discs, the subwoofer may not produce sound even
if the speaker size is set to "SMALL".
" "F-SMALL" and "SW-NO" cannot be combined. If the subwoofer is changed to
"SW-NO" while the front speakers are set to "F-SMALL", they are changed to "F-
LARGE". When the front speakers are changed to "F-SMALL" while the subwoofer
is set to "SW-NO", it is changed to "SW-YES".
" If "LARGE" is set for a small speaker, malfunction may result. Be sure to set the
speaker size to "SMALL".
" When the center and surround speakers and subwoofer are not connected, set the
speaker size to "C-NO", "S-NO" and "SW-NO". Otherwise, the protection circuit
may be activated and the power is turned off.
! Speaker delay setting
When some of the speakers are at a different distance from the listening point, you
can select the speaker delay to make it seem as though the speaker distances are
the same.
Notes:
" The speaker delay setting is only available for the front speakers and subwoofer if
the input is set to tuner, or the surround is "STEREO" or "VIRTUAL".
" The speaker delay setting is invalid while playing DVD-Audio or SACD discs (valid
for the CD layer of SACD discs).
4
Within 10 seconds, press the or button to
select their sizes.
To set sizes of other speakers, repeat the operation
from step 3.
5
Press the RETURN button twice.
The setting is complete.
Speaker type Speaker size
Front speaker (Left, Right) F-LARGE * Large diameter
F-SMALL Small diameter
Center speaker C-LARGE * Large diameter
C-SMALL Small diameter
C-NO OFF
Surround speaker (Left, Right) S-LARGE * Large diameter
S-SMALL Small diameter
S-NO OFF
Subwoofer SW-YES * ON
SW-NO OFF
1
Set the MODE 1/MODE 2 switch to MODE 2 and press the AMP SET
UP button.
2
Within 10 seconds, press the or button to
select "SP DELAY", and press the ENTER
button.
3
Within 30 seconds, press the or button to
select the desired speaker.
The indicator of the selected speaker flashes.
4
Within 30 seconds, press the or button to
select the distance.
" You can change the distance in 1 foot (0.3 m) steps.
" To set the distance of other speakers, repeat the op-
eration from step 3.
5
Press the RETURN button twice.
The setting is complete.
Speaker type Delay range Default setting
FL Front speaker (Left) 1 to 29 ft 6 ft (2 m)
CT Center speaker 1 to 29 ft 6 ft (2 m)
FR Front speaker (Right) 1 to 29 ft 6 ft (2 m)
SR Surround speaker (Right) 1 to 29 ft 6 ft (2 m)
SL Surround speaker (Left) 1 to 29 ft 6 ft (2 m)
SW Subwoofer 1 to 29 ft 6 ft (2 m)