Sharp SD-HX600 - Manual (Page 63)

E-58
SD_HX600_SEC_SECL_E5.fm 04/3/15
ENGLISH
TINSKA016AWZZ
F
S
V
I
N
P
E
E
SD-HX600
Ad
v
a
nced
F
e
atures
- St
or
ing v
o
lume
,
s
u
rr
o
und or
a
m
plifie
r s
e
tt
ings
-
Storing volume, surround or amplifier settings
You can recall volume, surround or amplifier settings you stored (up to 4 settings) with
a simple operation.
Settings are stored in sound pattern buttons by default.
! Change the settings
Notes:
" You cannot store or recall sound patterns while playing a DVD-Audio/SACD disc or
listening to the radio.
" Even if you store a pattern with "STADIUM" or "HALL", 5.1 channel/mono sound
plays in "STANDARD".
Recalling stored settings:
If 5.1 channel sources (Dolby Digital or DTS) are played in "STADIUM" or "HALL",
you cannot recall sound patterns.
Default settings:
(*) indicates the supported surround sound.
1
Adjust volume, surround and the amplifier
Refer to page 20 (volume control), pages 42 - 43 (surround) and pages 48 - 51
(amplifier).
2
After setting, set the MODE 1/MODE 2 switch
to MODE 2 and press the SOUND MEMORY
button.
3
Within 5 seconds, press a SOUND PATTERN
(A/B/C/D) button.
Example: When you
press the SOUND
PATTERN A button.
To store in other buttons, repeat from step 1.
Set the MODE 1/MODE 2 switch to MODE 2 and press
a SOUND PATTERN (A/B/C/D) button containing set-
tings. Example: When you
press the SOUND PAT-
TERN A button.
Stored settings apply to volume, surround and amplifier.
Volume: 20 dB 20 dB 20 dB 20 dB
Sound mode (*): MOVIE1 MOVIE2 MUSIC1 MUSIC2
Amplifier settings:
Speaker size:
Front speakers F-LARGE F-LARGE F-LARGE F-LARGE
Center speaker C-LARGE C-LARGE C-LARGE C-LARGE
Surround speakers S-LARGE S-LARGE S-LARGE S-LARGE
Subwoofer SW-YES SW-YES SW-YES SW-YES
Speaker delay: 6ft (2 m) 6ft (2 m) 6ft (2 m) 6ft (2 m)
Speaker level: 0 dB 0 dB 0 dB 0 dB
Crossover frequency: 100 Hz 120 Hz 100 Hz 120 Hz
SOUND PATTERN button