Sharp SD-HX600 - Manual (Page 33)

E-28
SD_HX600_SEC_SECL_E2.fm 04/3/15
ENGLISH
TINSKA016AWZZ
F
S
V
I
N
P
E
E
SD-HX600
D
V
D Oper
ation
- U
s
e
ful
o
p
e
ra
ti
on
-
! To change the angle
You can change the angle of view when playing a DVD disc that contains scenes
recorded from multiple angles.
Notes:
" Some DVDs prohibit changing the angle.
" The angle number is not displayed if there is no other angle recorded. "XX" is dis-
played instead.
" Refer to the manual of the disc as the operation may vary depending on the disc.
! To zoom images (zoom)
You can magnify images during playback.
To return to normal view:
Press the ZOOM button repeatedly to select "Off" (the indicator goes out).
When you cancel the zoom function, you cannot shift the view.
Notes:
" An image may become distorted when zoomed.
" Subtitles cannot be zoomed.
" When the zoom indicator changes from white to red while shifting the image, you
cannot shift it any further.
1
When "ANGLE" appears on the unit
display during playback, set the
MODE 1/MODE 2 switch to MODE 2
and press the ANGLE button.
2
Use the ANGLE button to select an
angle number.
Each time you press, the angle changes.
1
2
1
In the pause mode or during play-
back, set the MODE 1/MODE 2
switch to MODE 2 and press the
ZOOM button.
ZOOM indicator
Pressing the button cycles through the zoom settings as follows:
ZOOM: 1 ( 1.2) ZOOM: 2 ( 1.5) ZOOM: 3 ( 2.0) Off (The indicator goes
out.).
2
To shift the view and display the desired part of a zoomed image,
press the , , or button repeatedly.
ZOOM : 1