Sharp SD-HX600 - Manual (Page 25)

E-20
SD_HX600_SEC_SECL_E1.fm 04/3/15
ENGLISH
TINSKA016AWZZ
F
S
V
I
N
P
E
E
SD-HX600
Pr
epara
tion f
o
r Us
e
- Ge
ne
ra
l c
o
ntr
o
l -
General control
! Volume control
! Muting
! To change the display brightness (2 levels)
Set the MODE 1/MODE 2 switch to MODE 1 and hold down the DISPLAY button for 3
seconds or more.
Each time you press, brightness changes.
Note:
The blue light on the bottom of the main unit and amplifier unit goes out when the dis-
play dims with "DIM ON" or "DIM AUTO".
Main unit Main unit operation:
When the VOLUME control is turned clockwise,
the volume will increase. When it is turned coun-
terclockwise, the volume will decrease.
Remote control operation:
Press the VOL + button to increase the volume
and the VOL - button for decreasing.
The volume is muted temporarily when setting
the MODE 1/MODE 2 switch to MODE 1 and
press the MUTE button.
Sound from the unit is muted.
" Press the MUTE button again to restore the
sound.
" When muted, the mute will be canceled and
sound restored if the volume is adjusted.
Dimmed (*) Brightened
(*) After approx. 5 seconds of DVD-Video playback, the display dims and the original
brightness returns when you stop playback. The brightness remains unchanged
during playback of other media.
0 1 2
.....
38 39 40