Type – Sun Microsystems SUN FIRE 280R User Manual
Page 228
200
Sun Fire 280R Server Owner’s Guide • January 2001
4. Type:
Substitute the name of the workstation you are using for local_hostname. Note that
/opt/SUNWvts/bin
is the default directory for SunVTS binaries. If you have
installed SunVTS software in a different directory, use the appropriate path instead.
5. Fine-tune your testing session by selecting only the tests you want to run.
Click to select and deselect tests. (A check mark in the box means the item is
selected.) Some tests useful to run on a Sun Fire 280R server are listed below.
# cd /opt/SUNWvts/bin
# ./sunvts -display
local_hostname
:0
SunVTS Test
Description
cdtest,
dvdtest
Tests the DVD/CD-ROM drive by reading the disc and verifying
the DVD/CD table of contents (TOC), if it exists
cputest
Tests the CPU
disktest
Verifies local disk drives
env5test,
i2ctest
Tests power supply, fan tray, LEDs
fputest
Checks the floating-point unit
fstest
Tests the integrity of the software’s file systems
m64test
Tests the PCI graphics board
mptest
Verifies multiprocessor features (for systems with more than
one processor)
nettest
Checks all the hardware associated with networking (for example,
Ethernet, token ring, quad Ethernet, fiber optic, 100-Mbit per second
Ethernet devices)
pmem
Tests the physical memory (read only)
rsctest
Tests the RSC card
sptest
Tests the system’s on-board serial ports
tapetest
Tests the various Sun tape devices
usbkbtest
Tests the keyboard
vmem
Tests virtual memory (a combination of the swap partition and the
physical memory)