What to do, Become superuser or the root user, Type the following luxadm command – Sun Microsystems SUN FIRE 280R User Manual

Page 157: Type c at the prompt to verify the list of devices

Chapter 5

Using and Servicing Internal Storage Devices

129

■

Synchronize and unmount any file systems mounted on the drive.

You must follow antistatic precautions when handling a disk drive. Complete
this task:

■

What to Do

1. Become superuser or the root user.

2. Type the following

luxadm

command:

Where is the logical device name for the drive. The system dialogue
follows the command.

3. Type

at the prompt to verify the list of devices:

The drives are now offline and spun down.

% su

Password:

# luxadm remove_device /dev/rdsk/

WARNING!!! Please ensure that no file systems are mounted on

these device( s).

All data on these devices should have been backed up.

The list of devices which will be removed is:

1: Device name: /dev/rdsk/c1t1d0s2

Node WWN: 20000020371b1f31

Device Type: Disk device

Device Paths:

/dev/rdsk/c1t1d0s2

Please verify the above list of devices and

then enter c or to Continue or q to Quit. [Default: c]:c

stopping: /dev/rdsk/c1t1d0s2.... Done

offlining: /dev/rdsk/c1t1d0s2.... Done