Siemens 4110 - Manual (Page 72)

71
Short messages (SMS)
Gigaset 4110isdn, GBR, A31008-G4110-B102-2-7619 sms.fm 4.9.02
Step
by
step
Registering/de-registering with the SMS centre
To receive SMS messages using your Gigaset 4110isdn, you must first have
your call number registered with the SMS service provider. You have to register
with an SMS centre to be able to receive messages as text via this SMS centre.
Registration normally takes place when you send an SMS message via this
service provider. Your ISDN call number is registered as an SMS-enabled con-
nection. For this, you must first enter and activate the SMS centre’s call
number (see previous section). You may need other information in order to reg-
ister and de-register. This can be obtained from the relevant service provider.
Please note that the call number (MSN) which is registered is the one assigned
as the transmit MSN to the handset you used to send the SMS message. If
you also want to send and receive SMS messages over other handsets using
different transmit MSNs, you will need to have these call numbers registered,
too.
Writing, saving and sending SMS messages
An SMS message can be up to 160 characters in length. SMS messages will
only be saved automatically if there is an interruption in sending. If you have
written an important SMS message and want to save it, you must do so before
sending it.
Info