Siemens 4110 - Manual (Page 27)

26
The Installation Assistant
Gigaset 4110isdn, GBR, A31008-G4110-B102-2-7619 Installations_assi.fm 4.9.02
Step
by
step
The Installation Assistant
The Installation Assistant can be called up any time to help you set the most
important functions. The following settings can be completed in sequence:
● Date and time.
● Determining/entering MSNs
– To determine MSNs (can only be queried if an MSN has not yet been en-
tered).
– Enter own number (MSNs = your telephone numbers) without a prefix.
● Set incoming MSN = call allocation of subscribers to a telephone number.
● Set outgoing MSN = call number via which external calls are conducted and
invoiced; the number can be individually set for each handset.
● Exchange code (when used with a telephone system).
● Exchange code (with installation behind a PABX)
Starting the Installation Assistant
Press * for selection menus.
Select using [  ] and [OK ]: Base Settings → Installation .
Confirm the prompt for starting the Installation Assistant with [YES].
Entering the date and time
Confirm the prompt for entering the time with [YES].
Enter the date in the format " - - . - - . - - " (day, month, year) and the time in the
format " - - : - - " (hour, minute) and confirm with [
| ].
Select using [  ] and [OK ]: Save entry .
1.
2.
3.
1.
2.
3.