Putting the telephone into operation, Product package, Setting up the base – Siemens 4110 User Manual
Page 13: Putting the telephone into operation, Product package setting up the base, Notes on setup range and reception strength
12
Putting the telephone into operation
Gigaset 4110isdn, GBR, A31008-G4110-B102-2-7619
Inbetriebnahme.fm
4.9.02
Step
by
step
Putting the telephone into
operation
Product package
●
1 base station
●
1 mains connector cable with plug-in power supply unit
●
1 ISDN connector cable
●
1 set of operating instructions
●
1 Gigaset 4000 Comfort
●
2 rechargeable batteries
●
1 belt clip for the handset
Setting up the base
Notes on setup
The base is designed for operation in protected areas with a temperature range
of +5 °C to +45 °C. It should be set up at a central location in the apartment or
house, such as a hallway.
Range and reception strength
The range in the open is approximately 300 m; a range of up to 50 m can be
attained in buildings. The reception strength display indicates the quality of
radio contact between the base and handset:
Power failure:
Your base station, the handsets registered on it and corded terminal equipment
will not be able to function in the event of a power failure. All settings and
stored information (messages, telephone directory entries) will be retained
indefinitely.
●
The Gigaset must never be exposed to any of the following:
sources of heat, direct sunlight, other electrical equipment.
●
Protect your Gigaset from moisture, dust, aggressive liquids and
vapour.
6
Reception strength 100%
K
Reception strength 75%
7
Reception strength 50%
8
Low reception strength
No reception (flashing)
!
Info