Displaying a cost overview display last call costs, Charge and call duration display – Siemens 4110 User Manual
Page 69
68
Charge and call duration display
Gigaset 4110isdn, GBR, A31008-G4110-B102-2-7619
Anlage.fm
4.9.02
Step
by
step
Entering the price per unit
Before the charges for each call can be calculated, the currency and price per
unit must be defined (the default setting is
No rate
). For determining the costs,
Units cent.off.
must be set (default).
Press
* for the selection menus.
Select using [
Z
] and [OK ]:
Costs
.
Select using [
Z
] and [OK ]:
Type of calcul.
Select using [
Z
] and [OK ]:
Rate --.--
(with decimal point) or
Rate ----
(without decimal point).
Enter the basic price and confirm with [
|
].
Select using [
Z
] and [OK ]:
Save entry
.
If you would like to set an additional currency:
Enter the currency and confirm [
|
].
Select using [
Z
] and [OK ]:
Save entry
.
If
No rate
was already set a prompt is displayed.
Confirm the prompt for accounting method with [YES].
All accounts are reset and the option is highlighted.
Displaying a cost overview
Depending on the setting, call or charge units are displayed for each internal
subscriber, for each configured MSN, and for the system as a whole.
Press
* for the selection menus.
Select using [
Z
] and [OK ]:
Costs
.
Select using [
Z
] and [OK ]:
Cost overview
.
The accounts for each internal subscriber and for each configured MSN are dis-
played. The total amount is shown at the start of the list.
Deleting the cost overview total
You are in the cost overview display:
Select using [
Z
] and [
|
]:
(required cost overview).
Select using [
Z
] and [OK ]:
Delete amount
.
Totalled and individual costs must be deleted separately. This means that if you
delete an MSN total for example, the individual charges incurred remain stored
in the handset and must be deleted individually.
Display last call costs
The total costs and the costs for the last call made on this handset can be dis-
played when the "talk" key is pressed.
* is pressed for the menu.
Press [
Z
] and [OK ] to select:
Costs
→
Last charge
(
'
before menu item = ON / none = OFF)
Press
C
.
1.
2.
3.
4.
5.
6.
7.
8.
9.
1.
2.
3.
1.
2.
Info
1.
2.
3.