Siemens 4110 - Manual (Page 28)

27
The Installation Assistant
Gigaset 4110isdn, GBR, A31008-G4110-B102-2-7619 Installations_assi.fm 4.9.02
Step
by
step
Finding your own numbers (MSNs)
The network provider will have notified you of your MSNs when they sent you
the order confirmation for your ISDN line. Provided the connection permits it,
these numbers can be requested from the central office and entered and dis-
played by Gigaset 4110isdn.
Confirm the prompt Find own numbers (MSN)? by selecting [YES].
If the display shows a positive answer (e.g. "3 numbers (MSNs) found") and you
do not want to enter any names for the MSNs, you can skip the following pro-
cedure with [NO].
If this function is not supported by the service provider, the MSNs must be en-
tered manually; see next chapter.
Enter own numbers (MSNs) and name for the MSNs
You can store up to 10 numbers. For easier identification, you can enter a name
for each number.
Confirm the prompt for entering the call number with [YES].
Confirm the prompt for entering the first MSN with [YES].
Enter name or use = to change to the call number; enter or change the call
number without the area code and confirm with ) .
Select using [  ] and [OK ]: Save entry .
You are prompted for the next MSN.
Setting incoming MSNs
The number is used to call your handset/terminal. You can assign several
MSNs.
To confirm the incoming MSN prompt, select [YES].
To confirm the allocation prompt select [YES].
or To move to the next internal number, select [NO].
Press [  ] and [OK ] to select: (one or more MSNs).
To confirm, press Š.
To end the procedure select œ .
Allocations for further internal parties are offered.
1.
1.
2.
3.
4.
Your handset will not ring if you have entered the call number incorrect-
ly (for example if you have put the area code in front of the required
number).
1.
2.
2.
3.
4.