Activate/deactivate advisory tones, Set handset individually – Siemens 4110 User Manual
Page 38
37
Set handset individually
Gigaset 4110isdn, GBR, A31008-G4110-B102-2-7619
Mobil_indiv.fm
4.9.02
Step
by
step
Alerting tone
When switching off the ring tone you can activate an alerting tone. When a call
arrives you will then hear a short tone (“beep”) instead of the ring tone.
Long-press
~
, then press the
005
display key within 3 seconds. Calls will
then be signalled by one short alerting tone. The display shows
\
.
To deactivate the alerting tone:
Long-press
~
.
The ring tone has now been reactivated.
Activate/deactivate advisory tones
●
Key click: every key actuation will be confirmed.
●
Acknowledgement tones: confirmation tone (ascending sequence) at the
end of inputs/settings and when placing the handset in the base; error tone
(descending sequence) when incorrect entries are made; end-of-menu tone
at the end of the menu.
●
Low-battery tone: the battery needs recharging.
Press
* for selection menus.
Select using [
] and [OK ]:
Sound Settings
→
Advisory Tones
.
The current setting will be displayed.
Select using
) *:
On
or
Off
to activate/deactivate key click.
Use
' to skip one line down.
Select using
) *:
On
or
Off
to activate/deactivate acknowledgement
tones.
Use
' to skip one line down.
Select using
) *: select
On
,
Off
and
In Call
(battery-low tone while call is in
progress) to activate/deactivate battery-low tone.
Select using [
] and [OK ]:
Save
.
1.
2.
3.
4.
5.
6.
7.
8.