Siemens HIPATH 8000 - Manual (Page 263)

Call recording
263
Step by Step
Controlling call recording
Starting call recording manually during a call
Prerequisite: Manual mode or AutoStart is selected.
You are conducting a call. Recording has not started.
The recording button LED is not lighting.
[
You are conducting a call (see also page 259).
S
Press the recording button to start the recording - the
LED key lights up.
You hear a beep and the recording symbol
|
is shown
on the display. The call is now being recorded (see also
page 260)
Pausing call recording manually during a call
Prerequisite: Manual mode or AutoStart is selected.
You are conducting a call. Recording has started. The
recording button LED lights up.
[
You are conducting a call (see also page 259).
R
Press the recording button to pause the recording - the
LED extinguishes and the recording symbol |
on the
display disappears.
You can start the recording again at any time, for
example to continue recording the current call.
Ending call recording automatically
Prerequisite: You are conducting a call. Recording has
started. The recording button LED lights up.
]
or
n
The recording is ended automatically as soon as the call
is terminated or if the call status changes so that the call
is no longer being recorded - for example if a line is
placed on manual hold and another line is seized
(Multiline).
The LED extinguishes and the recording symbol
|
on
the display disappears.