Siemens HIPATH 8000 - Manual (Page 121)

Enhanced phone functions
121
Step by Step
Select and confirm the option shown.
Select and confirm the option shown.
j
Specify a value and confirm your entry.
Select and confirm the option shown.
Allowing "Busy When Dialling"
If you activate this function, an incoming call received
while you are performing dialing is rejected. The caller
then hears the busy signal.
v
Press the key shown until the "Settings" tab is active.
Confirm the option shown.
if nec.
j
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown in the context
menu.
Select and confirm the option shown.
Outgoing calls
Autodial delay
Save & exit
Automatic dial delay does not work if you are us-
ing a dial plan and
Immediate dialing is config-
ured (see page 71). The number is automati-
cally dialed as soon as the string entered
matches an entry in the dial plan.
User
Configuration
Outgoing calls
Busy when dialing
Yes
Save & exit
This setup option can also be found under
"Handling" in the "Incoming calls" menu.