Siemens HIPATH 5000 - Manual (Page 50)

Step by Step
Team and Executive/Secretary Functions With Assigned Trunk Lines
50
Team and Executive/Secretary
Functions With
Assigned Trunk Lines
If this function has been configured (contact the service
personnel), you belong to a team of users for whom
special trunk lines exist. You can then conduct your calls
as usual via the trunk assigned to you.
In addition, you can also activate call forwarding or a ring
transfer for the lines of your group.
Forwarding Calls on Lines
You can immediately forward internal or external calls
on lines of your group to different internal or external
telephones (destinations); even external destinations
are possible in certain system configurations.
Activating call forwarding for one line activates the func-
tion for all members in your group.
n
Lift the handset.
qide
Enter the code.
o
Enter the desired line number.
e
or
f
or
g
Enter the line type you wish to use:
1 = all calls, 2 = external calls only, 3 =internal calls only
o w
Enter the destination number (without the external
code).
Deactivating call forwarding:
n
Lift the handset.
ride
Enter the code.
o w
Enter the desired line number.
If you have activated call forwarding for a trunk, a
special dial tone sounds when the line is seized.