Siemens HIPATH 5000 - Manual (Page 45)

Using Other Functions/Services
45
Step by Step
Controlling Relays (Not for HiPath 500)
If this feature is configured (contact the service person-
nel), you can turn up to four relays on and off to control
different facilities (such as a door opener).
Depending on how they are programmed, you can
switch the relays on and off or switch them on and have
them switched off automatically after a timeout.
n
Lift the handset.
qmd
or
rmd
Enter the code for "on" or "off".
e
...
h w
Enter the relay.
Radio Paging (Not for U.S., Not for
HiPath 500)
If paging equipment is connected to your system (con-
tact the service personnel), you can contact people via
their pocket receivers.
The pocket receiver indicates to the person you are
looking for that someone is trying to get in touch. The
person you page can then go to the nearest telephone
and call you.
The operating procedures differ according to the type of
radio paging equipment connected (simple or enhanced
paging equipment).
Simple Paging Equipment
Paging:
To be paged, you must have activated a call ringing
group
Æ Page 48, call forwarding Æ Page 14, or call re-
direction (service technician) to the internal station
number of your paging equipment.
A call request is then signaled automatically.
Special features must be taken into consider-
ation if your telephone operates with
HiPath 5000 RSM (system networking via PC
network)
Æ Page 56!