Siemens Gigaset DE380 IP R - Manual (Page 40)

39
Configuring the phone via the Web configurator
Program keys
Assign functions or direct-dial numbers to the programmable keys on the right-
hand side of your phone.
You can assign two different functions to each key; to switch between func-
tions, press and release the shift key
=
and then press the appropriate mem-
ory or function key. Each assignment is programmable as a direct-dial number
or a function. The keys are designated from top to bottom as P1 to P5, and P6
to P10 after pressing the shift key.
The following function keys have default settings:
P1 [Hold]
P2 [Transfer]
P3 [Conference]
P4 [DND]
P5 [Headset]
For example: if you want to assign a direct-dial number to the P1 key, you
must first reassign the [Hold] function to another key and then reprogram
the P1 key.
To program a key
¤
Click on [Add/Edit].
¤
Select the key type.
¤
Select the function or enter the direct-dial number.
¤
Select the key you want to program.
¤
Confirm with [Set] or cancel your input with [Cancel].
To delete assigned functions, click on the radio button for the corresponding
key and then on [Delete] (you cannot delete default key settings).
Please note
You cannot delete default settings, but you can assign them to other keys.