Siemens Gigaset DE380 IP R - Manual (Page 33)

32
Configuring the phone via the Web configurator
Authentication Password
Enter the code word (password) you received from your VoIP provider and
confirm it in the Confirm Password field. The phone needs the password
when registering with the SIP proxy/registrar server.
Only enter data into the other fields if asked to do so by your VoIP provider.
Server Settings
If you have downloaded the general settings for the VoIP provider from the
Gigaset configuration server ("Profile Download"
¢
page 29), then the fields
in this area will be preset with the data from the download. Generally speaking,
you do not need to configure any settings in this area.
Authentication Expire Time
Enter the time intervals at which the phone should repeat the registration
with the VoIP server (SIP proxy) (a request will be sent to establish a session).
The repeat is required so that the entry of the phone in the tables of the
SIP proxy is retained and the phone can therefore be reached. The repeat
will be carried out for all activated VoIP phone numbers.
If you enter 0 seconds, the registration will not be repeated periodically.
Register Server Address
Enter the DNS name or the IP address of the registrar server.
The registrar is needed when the phone is registered. It assigns your
SIP address ( username@domain ) to the public IP address/port number your
phone uses to log in. With most VoIP providers, the registrar server is
identical to the SIP server.
Example: reg.myprovider.com.
Register Server Port
Enter the communication port used in the registrar. It is generally port 5060
that is used.
Proxy Address
The SIP proxy is your VoIP provider's gateway server. Enter the IP address or
the DNS name of your SIP proxy server.
Example: myprovider.com.