Siemens Gigaset DE380 IP R - Manual (Page 31)

30
Configuring the phone via the Web configurator
¤
Select your VoIP provider from the list.
¤
Click on the §Finish§ button.
The data for the selected provider will be loaded onto your phone.
To complete configuration of your VoIP connection, enter your personal
account data under "Account Settings"
¢
page 31.
Advanced Settings
The settings on this page are preset in the factory and do not normally need to
be changed. Please note any information from your provider.
Some values may have changed if you have downloaded your provider's profile
automatically ("Profile Download"
¢
page 29).
SIP Port Number
Specifies the local communication port that the phone should use to receive
signaling data. Specify a number between 1024 and 49152. The default
port number for SIP signaling is 5060.
Please note
If your provider is not in the list, click on the §Cancel§ button. In this case you
will have to enter the general provider data manually under "Server Set-
tings"
¢
page 32 and "NAT traversal"
¢
page 33.