Sony BRS-200 - Manual (Page 44)

44
Installation and Connection of the Switcher
Ch
apt
er 3 Prep
ar
at
ion
s
3
Connect the Control Panel to an AC outlet with the AC power adaptor
(supplied) and the power cord for the AC power adaptor (supplied).
1 Insert the DC plug of the AC power adaptor to the DC IN 12V jack in the
direction indicated in the illustration below.
2 Fix the supplied DC IN plug retainer by tightening the two supplied
screws (+M3 × 6).
For connection with peripheral devices, see “Connecting External
Equipment” on page 33.
DC IN 12V
DC IN 12V
DC IN plug retainer (supplied)
Screws
(+M3 × 6)
(supplied)