Steps for the finishing process – Star Micronics 800C User Manual

Page 48

Text mode
Original mode

Steps for the finishing process
1. Place the finishing sheet over the image

on the cloth, with the cut out corner in
the top left. Make sure that the silicon
side is down. The finishing sheet should
completely cover the image.

2. Iron the finishing sheet at the same

setting used to iron the transfer sheet.

Note:

Do not remove the finishing sheet until it has cooled to room
temperature.

3. Slowly remove the finishing sheet from

the cloth starting from a corner.

4. If the image seems like it will peel off

of the cloth, repeat the finishing process.