Star Micronics 800C - Manual (Page 43)

34
3. Remove the film roll.
First remove the take-up roll located in
the front of the printer.
Next, remove the film roll in the back
of the printer.
Caution: Be careful not to touch the thermal print head because it may be very hot.
4. Remove the film roll bobbins from the
roll you just removed.
Note: You can dispose of used film rolls as normal garbage. However, you
should remember that all printed data will remain in reverse image on
the film roll. Take special precaution if you have printed sensitive
information using the film roll.
5. Follow the instructions on pages 4 - 6
to install a new film roll.