Star Micronics 800C - Manual (Page 47)

38
4. Click on the Mirror checkbox
in the Printers Setup dialog
box. This will cause the
printer to print a mirror image
of your design.
5. Load the iron-on transfer sheet, with
the printing side down, into the opening
in the paper tray cover. Make sure that
it is inserted completely into the printer.
Caution: Do not manually load more than one sheet at a time. Wait until the
first sheet has been completely printed before loading more sheets.
6. Print your image on the transfer sheet.
Steps for transferring the image on the cloth
1. Cut out the image on the transfer sheet
leaving approximately 1/2" margin
around the image. Round off the
corners because this will reduce the
chance of the image peeling off.
2. Carefully position the transfer sheet on
the cloth with the image side down.
3. Uniformly iron the transfer sheet with
the iron set to 320
°
F (160
°
C).
4. Slowly remove the transfer sheet from
the cloth starting from a corner.
Note: Do not remove the transfer sheet until it has cooled to room
temperature.