Star Micronics 800C - Manual (Page 46)

37
Printing with iron-on transfer
This printer can print not only on coated paper for laser quality color output, but it also
can output laser quality color images on iron-on transfer sheets. However, you should
observe the
Steps below when printing on iron-on transfer sheets.
Note: Use only Genuine Star Iron-on Transfer Sheets for this application.
The iron-on transfer is a great way to create original designs for T-shirts or other cloth
items. When you are printing iron-on transfer sheets, always select OHP Film in the
Media Type setting of the printer driver.
Steps for printing on the transfer sheets
1. Create an image with your software
program.
2. Place the finishing sheet, with its
silicon side facing upwards into the
paper tray base. The silicon side is the
side facing you when the cut corner is
in the upper right hand side.
Note: The finishing sheet is not for printing. It is used to prevent any
printing or feeding trouble with the iron-on transfer sheet.
3. After inserting the finishing sheet, place
the paper tray cover on top of the paper
tray base in the direction of the arrows
in the illustration at the right.