Star Micronics 800C - Manual (Page 44)

35
Changing the film roll setting
You must setup the printer driver in Windows when changing to a different type of film
roll. Follow the
Steps below.
Steps:
1. Open the Main group by double click-
ing on its icon.
2. Double-click on the Control Panel icon
in the Main group.
3. Double-click on the Printers icon.
4. Click on STAR WinType 800C on
LPT1 in the Installed Printers list,
if LPT1 is the port to which this
printer is connected.
5. Click on the Setup button.
6. Click on the Options button.