Star Micronics 800C - Manual (Page 26)

17
Operating the printer
Turning ON the power to the printer
Flip the switch located above the power cord
on the back side of the printer in the direc-
tion of arrow in the illustration at the right.
The switch should be in the [ ] position.
Turning OFF the power to the printer
Flip the same switch on the back side of the
printer in the direction of arrow in the illus-
tration at the right.
The switch should be in the [ ] position.
Caution: Never turn OFF the power when you are printing because this will
cause paper to jam inside of the machine.
See Chapter 4 Maintenance and troubleshooting for an explanation
on clearing paper jams.
Loading print media
You can load print media either via the paper tray or manually.
Caution: There are print media types which the paper tray cannot use.
They are: Iron-on transfer sheets (all sizes); Legal, Special A4 size
(all print media types). See Page 37 for details on printing on iron-on
transfer sheets.
The paper tray
The paper tray is for use with A4 and letter sized paper and OHP film only.
Steps:
1. Gently lift up the paper tray cover.