Sharp UX-S10 User Manual

Page 9

UP and DOWN arrow keys
Enlarge/reduce setting: When making a copy of a document, press these
keys to select an enlarge/reduce setting.
Volume setting: When a document is not in the feeder, press these keys to

change the speaker volume when the

key has been pressed, or the

ringer volume at any other time.
FUNCTION key settings: Press these keys after pressing the FUNCTION
key to scroll through the FUNCTION MODE settings.

Number keys
Use these keys to dial numbers, and enter numbers and letters when storing
auto-dial numbers.

Panel release
Press this release to open the operation panel.

STOP key
Press this key to cancel an operation before it is completed.

COPY/HELP/POLL key
When a document is in the feeder, press this key to make a copy of a
document. When a document is not in the feeder, press this key to print out
the Help List, a quick reference guide to the operation of your fax machine.
This key is also used after dialling to poll (request fax transmission from)
another machine.

START/MEMORY key
Press this key after dialling to begin fax transmission. Press this key before
dialling to send a fax through memory.

SMS key
Press this key to send an SMS message, check received SMS messages,
and access SMS settings.

Left and right arrow keys
Auto-dial numbers: When sending a fax or making a phone call, press these
keys to scroll through your auto-dial numbers, the “REVIEW CALLS” list (only
available if you have Caller ID), and the last number dialled (redial).
FUNCTION key settings: Press the right arrow key after scrolling with the up
and down arrow keys to select a FUNCTION key setting.