Sharp UX-S10 User Manual
Page 70
Sending a Fax by Automatic Dialling
68
Editing and clearing auto-dial numbers
If you need to make changes to a previously stored auto-dial number, or clear
a number, follow these steps:
1
Press
once and
once.
2
Press
or
until the number you wish to edit or clear appears in
the display.
3
Press
once.
4
Select EDIT or CLEAR:
EDIT:
CLEAR:
•
If you selected CLEAR, go to Step 8.
5
If you selected EDIT, make the desired changes to the number.
•
Press
or
to move the cursor to the digit or digits you wish to
change, and then enter the new digit. The new digit will replace the old
digit.
•
If you do not wish to change the number, go directly to Step 6.
6
Press .
7
Make the desired changes to the name.
•
Press
or
to move the cursor to the letter or letters you wish to
change, and then press the appropriate number key repeatedly until the
desired letter appears (see Step 5 on page 67). The new letter will replace
the old letter.
•
If you do not wish to change the name, go directly to Step 8.
FUNKTION
1
2
START/SPEICHER
Display:
1=EDIT, 2=CLEAR