Sharp UX-S10 - Manual (Page 74)

Sending a Fax by Automatic Dialling
72
♦
To stop automatic redialling, press .
♦
Under certain conditions (for example if a person answers the call on a
telephone), automatic redialling may stop before three redialling attempts
are made.
Error Correction Mode
The fax machine is set to automatically correct any distortions in a
transmission due to noise on the telephone line before printing at the
receiving end. This function is called Error Correction Mode (ECM). ECM is
effective for both transmissions and receptions, and is only effective when the
other fax machine has ECM as well.
If desired, you can turn ECM off. This will increase slightly the amount of
memory available for memory transmission and reception.
STOP
1
Press once and once.
2
Press once and 5 times.
3
Press once.
4
Press to select YES, or to
select NO.
5
Press to return to the date and
time display.
FUNKTION
1 2
STOP
The display briefly shows
your selection, then:
OPTION SETTING
ECM MODE
RECEIVE RATIO
1=YES, 2=NO