Sharp UX-S10 - Manual (Page 55)

Remote Operations
53
3. A
n
s
w
er
ing
Mac
h
ine
1
Press once and once.
2
Press once and twice.
3
Press .
4
Press the number keys to enter a 3-digit remote code number.
5
Press to store the remote number, and then to return to
the date and time display.
FUNKTION
START/SPEICHER STOP
Remote Operations
When you are out, you can call the machine from any tone dial telephone and
play back your messages using the remote commands. You can also use
these commands to change the reception mode and other settings.
Remote code number
To access the machine to perform remote operations, you must first enter your
remote code number. The remote code number has been set to "001" at the
factory. If you wish to use a different number, follow these steps:
Display:
Toll Saver
When you call the machine to listen to your messages, it will answer after one
ring if it has received at least one message, or after three rings if it has not
received any messages.
This allows you to save money on telephone charges, particularly if you are
calling long distance. If the machine does not answer after the second ring,
you can simply hang up before it answers, saving yourself the cost of that call.
REMOTE CODE
A.M. SETTING