Sharp UX-S10 - Manual (Page 68)

Sending a Fax by Automatic Dialling
66
Sending a Fax by Automatic Dialling
You can store up to 60 fax, phone, or SMS numbers in the machine for
automatic dialling.
♦
Auto-dial numbers are dialled by pressing until the desired number
appears in the display, and then .
Storing fax, phone, and SMS numbers for auto dialling
START/SPEICHER
1
Press once and once.
2
Press once.
3
Enter the fax or voice number by pressing the number keys. Up to 32
digits can be entered (only 20 digits can be stored for an SMS number).
(Note: A space cannot be entered.)
Important: An SMS number must include the area code.
•
To clear a mistake, press .
•
If a pause is required between any of the digits to access a special service
or an outside line, press . The pause appears as a hyphen. Several
pauses can be entered in a row.
•
If you are on a PBX, do not enter the access code for the public line. If the
number is within your PBX, enter an R before the number.
FUNKTION
FUNKTION
Display:
ENTER TEL/FAX #