Sharp UX-S10 - Manual (Page 111)

Messages and Signals
109
10. T
roub
le
-
s
hooting
Audible signals
OVER HEAT The print head has overheated. Operation can be
continued after it cools. If overheating frequently
occurs, try changing the print contrast setting to
LIGHT (see page 16).
PRINT HEAD FAIL/
YOU NEED SERVICE
(alternating messages) The print head has failed and requires service.
READY TO SEND A document has been loaded and the fax machine is
waiting for you to begin faxing or copying.
RECALLING This appears if you attempt to send a fax by
automatic dialling and the line is busy or the receiving
fax machine does not answer. Your fax machine will
automatically reattempt the call. (See Automatic
redialling on page 71.)
TOTAL PAGE(S) 01 Number of pages transmitted, received, or copied.
UNSENT E0/FE When viewing messages in the outbox, this appears if
you press after scrolling to a message with an
exclamation point next to it. E0 indicates that there
was no Caller ID service. FE indicates that an error
occurred during transmission.
Continuous tone 3 seconds Indicates the end of fax transmission,
fax reception, or copying. (Note that the
beep cannot be turned off.)
Intermittent tone
(3 beeps) 5 seconds
(1 second on, 1
second off) Indicates incomplete transmission,
reception, or copying.
Rapid intermittent
tone 35 seconds
(0.7 seconds on,
0.3 seconds off) Indicates that the handset is off hook.
SMS