Sharp UX-S10 - Manual (Page 15)

Loading the Imaging Film
13
1. Ins
tal
lati
on
Loading the Imaging Film
Your fax uses a roll of imaging film to create printed text and images. The print
head in the fax applies heat to the imaging film to transfer ink to the paper.
Follow the steps below to load or replace the film.
♦
The initial starter roll of imaging film included with your fax can print about
30 A4-size pages.
♦
When replacing the film, use a roll of Sharp UX-6CR imaging film. One roll
can print about 150 A4-size pages.
1
Remove the paper from the paper tray
and open the operation panel (press
➊
).
2
Remove the used film and
empty spool
3
Remove the two green gears from the
spools.
DO NOT DISCARD THE TWO GREEN
GEARS!
1
2
If you are loading the imaging film for
the first time, go to Step 4.