Deactivating the room monitor remotely, Setting the walky-talky mode – Siemens GigasetS44 User Manual
Page 18
17
Setting the Walky-Talky mode
Gigaset S44 / MEA engl / A31008-M1611-A611-1-7619 / start_guide_time.fm / 07.06.2005
Changing previously set
external destination number
v
¢
í
¢
Room Monitor
s
Scroll to the
Call to:
line.
§Edit§
Press the display key.
X
Delete existing number.
¤
Enter number as described in "Activat-
ing the room monitor and entering the
number to be called" (page 16).
¤
Save changes (page 10).
Changing previously set
internal destination number
v
¢
í
¢
Room Monitor
s
Scroll to the
Call to:
line.
§Edit§
Press the display key.
§Yes§
Press the display key to con-
firm the prompt.
¤
Enter number as described in "Activat-
ing the room monitor and entering the
number to be called" (page 16).
¤
Save changes (page 10).
Deactivating the room monitor
remotely
Requirements: The phone must support
touch tone dialling and the room monitor
is set for an external destination number.
¤
Take the call from the room monitor
and press keys
9 ;.
The room monitor function will deactivate
after the call ends. There will be no further
room monitor calls. The other room moni-
tor settings (e.g. no ringtone) on the
handset will remain activated until you
press the display key
§Off§
on the handset.
To reactivate the room function with the
same phone number:
¤
Turn on the activation again and save
with
§Save§
Setting the Walky-Talky
mode
The Walky-Talky function allows two hand-
sets to communicate with each other no
matter how far they are from the base sta-
tion.
Example:
You go on holiday and take two
handsets with Walky-Talky functionality
with you. Set the Walky-Talky function on
both handsets
.
Requirement:
One
of the following requirements must
be met.
u
Both handsets are registered to the
same base station.
u
Both handsets are registered to differ-
ent bases and both are set to
Best Base
u
One of the handsets is not registered to
any base station and the registered
handset is set to best base.
u
Neither handset is registered to a base
station.
Please note:
u
In Walky-Talky mode, the range
between the handsets is a maximum of
300 m in the open.
u
The handsets cannot be reached by
incoming calls.
u
The Walky-Talky mode severely short-
ens the handset operating times.
u
The Walky-Talky mode is retained even
when you switch your handset off and
back on.