Star Trac E-TBTe - Manual (Page 46)

47
620-7921 Rev A
Step 37.
Plug back the Heart rate ground cable into the
quick disconnect tab on the display mount. Step 38.
Plug the center console ground cable into the
quick disconnect tab on the display mount.
Step 39.
Plug the headphone jack cable coming from the
PVS neck into the, newly installed, headphone
jack on the front of display. Step 40.
Assemble the front and back display parts to-
gether by sliding the bottom of the front display
under the 2 tabs at the base first, then pressing
front display against the back cover.
Caution: Be careful not to pinch any wires.
1
2